Guns & Ammo Network


Collapse bottom bar
Subscribe

The 7mm STW Story

by Layne Simpson   |  July 12th, 2007 7

The search for a Bigger Seven opened the door for a family of magnum cartridges.

One day back in 1979 when the 8mm Remington Magnum had been with us for a bit less than two years I decided, just for the fun of it, to neck the new case up and down to various calibers. Realizing that the .338-caliber version would do no more than duplicate the performance of an existing factory cartridge called the .340 Weatherby Magnum, I quickly lost interest in it.

At the time, the 7mm version seemed to make the most sense for several reasons, one being the fact that the popular 7mm Remington Magnum and 7mm Weatherby Magnum cartridges were on the shortened Holland & Holland belted case, while our most popular rifles, the Winchester Model 70, Remington Model 700 and Weatherby Mark V, were quite capable of handling cartridges on the full-length case.

Since the cartridge I had in mind was on a Remington-designed case and since it was bound to be faster than the short 7mms, I decided to call it the 7mm Remington Maximum.

At the time, powders of super-slow burn rates that would be required in order to reach maximum velocities in the cartridge were quite scarce, and for this reason the new wildcat remained nothing more than an idea for several years.

My interest in the Bigger Seven project was renewed in 1986 when DuPont finally got around to making available to the canister trade an old, slow-burning propellant called IMR-7828. Up until that time it had been available only to commercial ammunition manufacturers for use in the .264 Winchester Magnum and 7mm Remington Magnum.

During that same year Bob Hodgdon informed me that H5010, a military surplus powder originally developed by DuPont for the .50 BMG cartridge, was available from his company and a supply was headed my way. Not long after that Hodgdon introduced another slow-burner called H1000, and soon thereafter Hercules (now known as Alliant) introduced Reloder 22. It was time to see how fast the big cartridge could run.

Kenny Jarrett put together the very first rifle in 7mm STW in 1987. Built on a blueprinted Remington 700 action, it has a 25-inch Hart barrel with a 1:10-inch twist and a McMillan fiberglass stock with that company’s wood-grain finish. I have not kept an accurate record of how many rounds I have fired in that rifle but am sure it is more than 1,000, and it still averages less than an inch at 100 yards.

When new, it averaged less than a half-inch with the Nosler 140-grain Ballistic Tip. The rifle still wears the same 2.5-10X Schmidt & Bender I installed on it the day I got it. Its weight of 93?4 pounds makes it a bit much for toting up a sheep or goat mountain, but it is ideal for sitting in one spot and shooting away over yonder, which is mostly what I have used it for.

Shortly before Jarrett had completed the rifle I decided to change the name of the cartridge to 7mm Shooting Times Westerner, or 7mm STW for short, and it stuck. My first article on the new cartridge was published in Shooting Times in 1988, and to simply say that it took off like a scalded dog among hunters across the country would be an understatement of the facts.

OTHER MEMBERS OF THE FAMILY

My first store-bought deer rifle was a Marlin 336 in .35 Remington, and I liked the caliber so much that I eventually got around to hunting with rifles in .358 Winchester, .35 Whelen and .358 Norma Magnum. After using a rifle chambered for the latter cartridge on a moose hunt in Sweden, I decided to neck up the 8mm Remington case to .358 caliber and call it the .358 Shooting Times Alaskan. Kenny Jarrett built the first rifle in that chambering for Bob Nosler and I got the second one, a switch-barrel Model 700 with its other barrel in 7mm STW. A few months later I headed to Alaska, where I bumped off a brown bear with the 250-grain Nosler Partition loaded to 3,000 fps.  

I introduced the .358 STA to the world in 1992. Unlike the .257 STW and 6.5 STW, which are nothing more than the 7mm STW case necked down with the original body taper and shoulder angle retained, the .358 STA is the 8mm Remington Magnum case necked up and fire-formed to minimum body taper and a 35-degree shoulder angle. Cases can also be formed by necking down and fire-forming the .416 Remington Magnum case. When both are loaded to maximum chamber pressure with 250-grain bullets, the .358 STA is about 200 fps faster than the .358 Norma Magnum. It pretty much duplicates the performance of the 1920s-vintage .350 Griffin & Howe Magnum and the .350 Super Magnum, which was introduced by Art Mashburn during the 1940s. All are on the full-length Holland & Holland belted case.

At that point I had no intention of adding additional members to this particular wildcat family, but letters from readers who requested cartridges of other calibers eventually caused me to introduce the .257 STW in 1998. Lex Webernick built the rifle, and I first used it and a handload with the Nosler 100-grain Ballistic Tip at 3,700 fps to take a nice Coues deer down in Old Mexico.

About a year later I came up with the 6.5 STW, not because it had received a great number of votes from readers but because I was quite interested in that particular bullet diameter. The first rifle in that chambering was built by the Canadian firm Prairie Gun Works, and the first game I took with it was a black bear on Vancouver Island. The handload I used pushed along the Nosler 140-grain Partition at close to 3,200 fps.

When both are loaded to the same chamber pressures and fired in barrels of the same length, I find the .257 STW to be about 200 fps faster with all bullet weights than the .257 Weatherby Magnum. I also find the 6.5 STW to be about 200 fps faster than the .264 Winchester Magnum. Whether that much gain in bullet speed is worth the effort is for the fellow who will be spending his own money for a new rifle to decide.

 

At first, top management at Remington had no interest in the 7mm STW because as they saw it, a factory-loaded version would spell doom for the 7mm Remington Magnum. Decision-makers at Winchester Ammunition gave it an even colder shoulder because they feared that other shooting publications would ignore it since its name contained the words “Shooting Times.” (Shooting Timesis now a sister InterMedia Outdoors publication ofRifleShooter.–Ed.)

The chaps at Remington eventually changed their minds, and why they did is one of my favorite parts of the story. At the time, the 8mm Magnum was a dead duck; Remington had dropped it from the Model 700 rifle, and ammunition sales had become practically nonexistent. Then suddenly, orders for thousands upon thousands of rounds of 8mm Magnum unprimed brass began to pour in from distributors across the country. As Remington’s investigation revealed, all those cases were being sold to handloaders who owned rifles in 7mm STW.

One of the reasons the 7mm STW became so successful so quickly was the fact that the chamber of any rifle in 7mm Remington Magnum could be reamed out for it. One gunsmith who charged $60 for a rechamber job (and who wisely ran advertisements in the issue of Shooting Times in which my first article on the cartridge appeared) told me that within 12 months after my first article was published he had rechambered more than 600 rifles from 7mm Remington Magnum to 7mm STW. That was from only one among dozens of gunsmiths across the country who were offering the same service.

Soon after Remington woke up to the fact that rifles in 7mm STW would sell, the wheels of progress began to pick up more speed. Then in a ceremony held during the 1997 NRA annual meetings, I was presented with the very first production rifle built in 7mm STW. I also received the first box of 140-grain Core-Lokt ammunition to come off the production line.

That first load offered by Remington was rated at 3,325 fps, but, as many of us eventually discovered, it exceeded 3,400 fps in some rifles with 26-inch barrels. Twelve months later Remington had sold just over 600,000 rounds of 7mm STW ammo, something I used to take great joy in mentioning to my friends at Winchester who had turned down the opportunity to beat their competition to the punch.

7mm STW LOAD DATA
BULLET POWDER VELOCITY DATA SOURCE
(Type) (Grs.)
(Highest Velocity Loads Listed)
Hornady 100-gr. HP RL-22 83.6 3,800 Hornady
Barnes 100-gr. XBT RL-22 81.0 3,634 Barnes
Sierra 120-gr. SPT V-N 160 78.0 3,600 Sierra
Barnes 130-gr. XBT H4831 79.0 3,523 Barnes
Sierra 130-gr. MK RL-22 80.0 3,600 Sierra
Barnes 140-gr. XFB IMR-7828 80.0 3,473 Barnes
Nosler 140-gr. Part RL-22 82.0 3,382 Lyman
Nosler 140-gr. B-Tip RL-22 79.0 3,410 A-Square
Sierra 140-gr. SPT IMR-7828 79.0 3,400 Sierra
Barnes 150-gr. XBT H-1000 81.0 3,359 Barnes
Nosler 150-gr. B-Tip AA-8700 92.0 3,300 Nosler
Sierra 150-gr. SBT H870 91.0 3,350 Sierra
Barnes 160-gr. XFB H1000 80.0 3,287 Barnes
Nosler 160-gr. Partition IMR-7828 78.5 3,272 A-Square
Sierra 160-gr. SBT H870 88.4 3,250 Sierra
Barnes 160-gr. XLCFB N-MRP 79.0 3,384 Barnes
Nosler 175-gr. Partition AA-8700 89.0 3,047 Nosler
Sierra 175-gr. SBT H870 86.3 3,100 Sierra
Speer 175-gr. GS AA-8700 90.0 3,083 Lyman
Barnes 190-gr. Orig. IMR-7828 75.0 3,127 Barnes

 

Other companies besides Remington also played important roles in the success of the 7mm STW. About four years before Remington adopted it, the custom shop of U.S. Repeating Arms began to offer Winchester Model 70 rifles chambered for it. That made the Model 70 one of very few factory rifles to ever be offered in a wildcat chambering. During a private meeting with USRAC officials in 1993 I was told about a yet-to-be-announced custom variation of the Model 70 and was asked to come up with a name for it.

The new rifle would be built for big-game hunting and it would wear a Schneider match-grade barrel, so I casually mentioned that “Sporting Sharpshooter” would be an appropriate name for the rifle. Shortly after that meeting took place I received the very first Model 70 Sporting Sharpshooter built by USRAC. Even more surprising was “7mm STW” engraved on its barrel. From that day on, the 7mm STW chambering was on the custom shop’s list of options.

The next event that went a long way toward greasing the wheels of progress for the 7mm STW was the 1994 introduction of custom-loaded ammunition by A-Square. During a factory visit with Art Alphin, who owned the company at the time, I was asked which bullets should be offered. Soon thereafter I received a batch of the ammo, and the 140-grain load clocked an average of 3,437 fps when fired in my rifle. The 160-grain load averaged just under 3,200 fps.

So while Remington must be given a lion’s share of credit for the success of the 7mm STW, we must not overlook the fact that Winchester was chambering custom rifles for it and A-Square was making the ammunition before Remington got around to adopting it. After Remington made an honest cartridge out of the 7mm STW, Winchester, Weatherby, Sako, Ruger, Tikka, Savage and possibly others also started offering rifles chambered for it. Federal, Winchester and Speer (under the Nitrex label) started loading the ammo.

These days you are more likely see me in the field with the 6.5 STW, mainly because I have come to appreciate that bullet diameter, but I still sometimes hunt with rifles in 7mm STW. In addition to that first Jarrett rifle, the Model 700 Sendero given to me by Remington and the Winchester Model 70 Sporting Sharpshooter I mentioned earlier, my battery contains a lightweight rifle built on the Model 700 action by Lex Webernick that weighs six pounds with scope. It is actually one of three matching Webernick rifles I own, the other two in .257 STW and 6.5 STW. I also have a Ruger No. 1 that was rechambered from 7mm Remington Magnum.

Right from the start the Nosler 140-grain Ballistic Tip proved to be the most accurate bullet in my Jarrett rifle. I have taken quite a few whitetail deer and pronghorn antelope at longish ranges with that bullet and have even used it to bump off a caribou or two, but it is too soft to use on larger game, so for elk I settled on tougher 160-grain bullets such as the Nosler Partition and Swift A-Frame.

As I grow older I tend to keep life more simple by using a good 160-grain bullet on everything from mice to moose. The 160-grain Nosler AccuBond is also an excellent choice, and a friend of mine is convinced that elk-bullet evolution ended with the Barnes X-Bullet of that weight. When loaded to 3,200 fps and zeroed three inches high at 100 yards, either of those bullets is just about dead on the money at 300 yards and less than a foot low at 400 yards, where it is still packing more than 2,000 ft-lbs of punch. A 140-grain bullet at about 3,400 fps shoots a bit flatter, but not by enough to really matter and it is nowhere near as versatile.

As for factory ammo, I really like Remington’s loading of the 140-grain Core-Lokt for deer and Federal’s Premium loading with the Nosler 160-grain AccuBond for all-around use on everything from pronghorn and deer to moose and elk.

6.5 STW LOAD DATA
BULLET POWDER VELOCITY DATA SOURCE
(Type) (Grs.)
Sierra 85-gr. HP IMR-7828 85.0 4,016 L. Simpson
Nosler 100-gr. Partition H1000 88.0 3,863 L. Simpson
Speer 120-gr. SP H1000 83.0 3,511 L. Simpson
Nosler 125-gr. Partition AA-8700 91.0 3,515 L. Simpson
Swift 130-gr. Scirocco H50BMG 88.0 3,461 L. Simpson
Nosler 140-gr. Partition AA-8700 90.0 3,316 L. Simpson
.257 STW LOAD DATA
BULLET POWDER VELOCITY DATA SOURCE
(Type) (Grs.)
Hornady 75-gr. HP RL-22 85.0 4,036 L. Simpson
Nosler 85-gr. B-Tip RL-22 83.0 3,914 L. Simpson
Nosler 100-gr. Partition H1000 86.0 3,709 L. Simpson
Nosler 115-gr. B-Tip AA-8700 92.0 3,546 L. Simpson
Sierra 117-gr. SBT AA-8700 89.0 3,507 L. Simpson
Nosler 120-gr. Partition H1000 82.0 3,466 L. Simpson
.358 STA LOAD DATA
BULLET POWDER VELOCITY DATA SOURCE
(Type) (Grs.)
Barnes 180-gr. XFB RL-19 95.0 3,357 Barnes
Barnes 200-gr. XFB IMR-4831 90.0 3,217 Barnes
Nosler 225-gr. Partition H4350 87.0 3,182 Hodgdon
Barnes 225-gr. XFB IMR-4831 87.0 3,128 Barnes
Barnes 250-gr. XFB IMR-4831 86.0 2,995 Barnes
Nosler 250-gr. Partition H4350 89.0 2,981 L. Simpson
A-Square 275-gr. LL H4831 90.0 2,857 A-Square
NOTES: All powder charges are maximum and should be reduced by 12 percent for starting loads. Cases for .257 STW and 6.5 STW formed by necking down Remington 7mm STW brass; .358 STA case formed by necking up 8mm Remington Magnum brass and fire-forming with a reduced powder charge. All rifles had 26-inch barrels.

 

I have lost count of those who have taken the time to write through the years to tell me how pleased they are with the accuracy of their rifles in 7mm STW. Many of the rifles had been rechambered from 7mm Remington Magnum, and the accuracy of a very large percentage improved dramatically after their rechamber jobs.

Most who saw the sizes of their groups shrink assumed that it was due to the 7mm STW being a more accurate cartridge than the 7mm Remington, and while that may very well be true I have my doubts. Rather, I tend to believe that the improvement in accuracy was most often due to more concentric chambers cut by the gunsmiths who rechambered their rifles.

I still receive a good bit of mail from fans of the 7mm STW, but it has now lost a great deal of the momentum it once enjoyed. Remington stopped promoting it soon after introducing its own 7mm Ultra Mag, and not long after that the super-short magnums came along to steal even more of its thunder. Most companies no longer chamber standard-production rifles for it, and few writers (including this one) even bother to mention it anymore. But one thing is certain: The 7mm Shooting Times Westerner was a fun ride while it lasted.

WARNING: The loads shown here are safe only in the guns for which they were developed. Neither the author nor Primedia assumes any liability for accidents or injury resulting from the use or misuse of this data. Shooting reloads may void any warranty on your firearm.

 

  • R. M. Skip Brunhaver

    I own a Winchester Model 1885 that I had re-chambered in 7mm STW improved (with a 40 degree shoulder). The 28" barrel allows me to achieve great external ballistics. The rifle is a great long range shooter.

  • Tater

    The 7MM STW is my weapon of choice for deer hunting as I have killed deer 300+ yards with very little parallex adjustments. I am totally committed to this rifle. It is a Remington 700 and has been and will continue to be in my deer hunts.

  • pnaman

    I bought a used Rem 700 in 7mmstw , I plaved a Leupold 4.5×14 scope on it and I took a beautiful 3 point buck from Colorado at 525 yards. Hornady AMAX 162 gr.

    We also shot that rifle at over 1,000 yards- 78 clicks up from the 100 yard zero. We were able to hit bottle sized targets at that range. No I will never sell this one. It is in a lightweight configuration though and it likes to let me know it went off.

    • joeMc UK

      I have a 700 Sendero, one of the original ones! Its fitted with a Jewell trigger AS Ultra sound moderator
      " We are allowed these in the UK". The bearrel is the standard Remmy 26 inch fluted . All in it weighs nearly 14 lbs.

      Scope is a Nightforce 8x32x56 in Warne rings on a Farrel 20 MOA base.
      Action has been blue printed and Marinetex bedded.

      I load 168 gr Berger VLD with 78 grns of Reloader 25 and a Remington 9 1/2 primer. 3086 FPS adjustment for 1100 yds = 25 1/2MOA .. I use the Nightforce Ballistic programme this will put a first shot hit on a 45 cm steel gong at 1100 yds.

      This rifle is so accurate especially at long range. I have head shot plains game at 400 yds plus in Namibia " Witnessed by the PH". I also have a custom 6.5 x 284 , same set up but with a Kreiger barrel. Both superb rifles, used for long range shooting in Namibia and foot stalking here in the UK.

  • TF, Alaska

    I was talked into buying a 7STW by a good friend and gun collector. I have since moved to Alaska and have killed everything from a 9-1/2' brown bear to a trophy moose, goat,caribou, red stag from argentina, countless elk, deer , black bear and i could go on and on. It is the most accurate gun i own.I have lots of different calibers but take this one on almost every hunting trip because of the reliability and accuracy. I will never get rid of this gun, if anything i will buy 1 or 2 more for back-ups. The 140 gr. ballistic tips are my favorite. Last year i took a trophy goat at 640 yds. I have a leupold CDS scope that bring the accuracy to a new level. Once again…… my favorite cartridge!

  • JC, Wisc

    I was also talked into rechambering a 7mm Reminton Magnum into the STW and found it was the best investment I ever made. It is by far the most accurate rifle I have ever owned. I have hunted elk, mule deer, whitetale deer and have no trouble with shooting long range if required, although not desired. When I find the need for it, it is the best around. The longest shot was a mule deer almost 700 yards.

  • dok – TX

    I bought a new Rem 700 SPS in 7 mag and sent it to Charlie Robertson in NM in late 1988 (he was the only smith I could find with the 7STW reamer and he produced a masterpiece). I have no doubt it is the most deadly rifle in my arsenal. In the past 24 years, it has produced nothing but one shot kills on a huge variety of game including my son's 176 Montana mulie in Nov. I doubt now that I'll ever see it in my gunsafe again. We all know how to to avoid what gun writers advise,but Layne Simpson hit a homerun with the 7 STW, the most versatile 7mm ever.

back to top