Redding's PR-50 Volumetric Powder Measure

Redding's PR-50 Volumetric Powder Measure
Redding’s PR-50 volumetric measure provides benchrest-grade consistency with most propellant granule types.

Filling your rifle cartridge cases with consistent charges of gunpowder is a cornerstone of building accurate handloads. However, the process of producing those consistent charges can be slow, effort-intensive and aggravating.

Precision handloaders address the issue with various methods, using some combination of powder tricklers, mechanical scales, electronic powder chargers and sometimes volumetric measures.

The latter is an often misunderstood tool viewed as primarily suitable for high-volume loading where charge consistency isn’t particularly important. However, a premium-quality volumetric measure can provide excellent consistency and has several advantages—namely they’re not affected by moving air or changes in barometric pressure.

Volumetric measures are fast, typically capable of throwing a charge every few seconds. However, many—even most—aren’t capable of throwing super-consistent charges, simply because they’re not built with the precision and engineering necessary to do so.


Long-grain extruded propellants can cause issues in all powder measuring systems. Tricklers and electronic dispensers suffer from grains stacking or bridging at the dispense tube’s mouth, then collapsing all at once into the pan. Volumetric measures suffer from grains getting caught between rotating edges, which in most measures causes a significant jolt as the handle is rotated and the grains sheared through. Vibration causes settling, and in a volumetric measure, settling causes inconsistent charge weights.


But a really good volumetric measure, such as Redding Reloading’s new PR-50 volumetric measure ($326) is capable of producing charge consistency that rivals the best electronic chargers.

Redding tailors its volumetric measures to relatively narrow charge-size sweet spots, which enables the company to engineer each model for ultimate consistency when throwing charge weights inside a certain window. The PR-50 is geared for cartridges such as the 6.5 Creedmoor. Redding also sells high-volume, and since all measures use the same diameter hopper, they’re interchangeable.

Each drum—the rotating part that contains the metering chamber—is made from U.S.-sourced bar stock steel, on U.S.-made Haas CNC machines. Drums are then centerless ground, which results in a perfectly round part with a high-polish ground finish. A series of plating processes are applied, finishing with a final layer of hard chrome.

“The grinding process also creates a very sharp cutting edge on the metering chamber, which is critical to cleanly cutting through long-grain powders,” said Robin Sharpless, Redding’s vice president.


Each drum is individually fit into a frame of dense-grain virgin cast iron that’s been Haas CNC-machined, then honed on a Sunnen Hone to .001-inch perfection. With almost no porosity, the fine-grain cast iron has a surface that almost self-lubricates against the chrome.

Redding uses a “hemispherical” plunger that features a concave face shaped like a test tube bottom. This prevents long-grain propellants from bridging or stacking. Hoppers feature a baffle that helps keep metering-chamber fill consistent whether the hopper is topped off or nearly empty.

Sharpless passed along some tips to improve consistency, advice that is good for pretty much any type of volumetric measure. He said it’s important to do the exact same thing every time you cycle the measure.


“If you tap the handle once at the top and twice at the bottom, do that every time,” he said.

He also recommends throwing 10 charges after the measure is filled and dumping them back into the original canister. This removes the dense layer packed in the bottom. He also recommends slow, even cuts when throwing charges of long-grain powder.

Redding also offers an optional bench stand for mounting measures on a bench. It’s made of aluminum and doesn’t have any square angles, so it deadens vibration—the enemy of precise, consistent volumetric powder measuring.

Following Sharpless’s tips for consistency, I ran tests with three different types of propellants, throwing 100 consecutive charges and weighing each on an RCBS M1000 mechanical scale.

Throwing 50 grains of H380—a spherical powder suitable for a broad range of cartridges—an astounding 98 fell dead on the money. The other two charges? A tenth-grain shy. That’s superb consistency, although spherical powders are known for consistent metering. IMR’s 8208 XBR—a small-grain stick powder popular among benchresters—also displayed good consistency. Seventy-eight charges were perfectly on, while 22 were a tenth-grain shy.

For a long-grain propellant, I tested Hodgdon’s über-popular H4350, which is the go-to for 6.5 Creedmoor. Long-grain powders are challenging to meter, so it wasn’t surprising that consistency wasn’t quite as good as with the other two powders. Fifty-one of the charges were exactly on target, and 36 were only 0.1 grain high. The rest were not that close, but of the 100 charges, 99 varied no more than 0.3 grain from lowest to highest charge weight.

I would call this excellent performance from a volumetric measure. Whether this sort of consistency and convenience matters for your reloading—and whether the expense is worth it—is a decision you have to make.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

See More Recommendations

Popular Videos

Delta 5 - Daniel Defense

Delta 5 - Daniel Defense's New Precision Bolt Action Rifle

Those looking to explore precision rifle shooting without going broke will be well served by Daniel Defense's new Delta 5.

Hornady 6MM Creedmoor

Hornady 6MM Creedmoor

Tom Beckstrand and Neal Emery of Hornady highlight the 6MM Creedmoor ammo.

RS Sako Finnlight II

RS Sako Finnlight II

The new Sako Finnlight II sports an innovative stock and Cerakote metal paired with the terrific 85 action.

Gun Clips with Joe Mantegna - BULLPUPS

Gun Clips with Joe Mantegna - BULLPUPS

Joe Mantegna talks about the origins of Bullpups.

See More Popular Videos

Trending Articles

The new MSR 15 Long Range in .224 Valkyrie reaches out with authority. MSR

Review: Savage Arms MSR 15 LR

David Fortier - May 17, 2019

The new MSR 15 Long Range in .224 Valkyrie reaches out with authority.

Some history and reloading recipes on five popular .17-caliber cartridges, including the .17 Ackley Hornet, .17 Hornady Hornet, .17 Mach IV, .17 Remington Fireball and .17 Remington. Reloading

.17-Caliber Reloading Data and History for 5 Cartridges

Layne Simpson - June 05, 2019

Some history and reloading recipes on five popular .17-caliber cartridges, including the .17...

Want to get into the long-range game and not go broke? Check out the Mossberg MVP Precision Rifle. Reviews

Mossberg MVP Precision Rifle Review

J. Scott Rupp - March 21, 2019

Want to get into the long-range game and not go broke? Check out the Mossberg MVP Precision...

Ruger introduced .300 PRC and 6.5 PRC chamberings for the Ruger Precision Rifle. Bolt-Action

Ruger Precision Rifle Now Chambered in .300 PRC and 6.5 PRC

Rifleshooter Digital Staff - April 27, 2019

Ruger introduced .300 PRC and 6.5 PRC chamberings for the Ruger Precision Rifle.

See More Trending Articles

More Reloading

New reloader powders from Alliant offer improved stability in a wide range of conditions. Reloading

New Powder from Alliant with Improved Stability

Joseph von Benedikt - January 11, 2019

New reloader powders from Alliant offer improved stability in a wide range of conditions.

Approach the Bench: Be more efficient with an organized workspace. Reloading

RCBS Mega Tumbler

September 23, 2010

Approach the Bench: Be more efficient with an organized workspace.

The new RCBS MatchMaster Powder Dispenser has 0.04-grain accuracy with dual-tube dispensing technology.

RCBS MatchMaster Powder Dispenser – Fast and Accurate

Shooting Times Digital Staff - October 11, 2019

The new RCBS MatchMaster Powder Dispenser has 0.04-grain accuracy with dual-tube dispensing...

A close look at using small rifle primers rather than large rifle primers in reloading cartridge cases where both are offered; testing shows size matters little, with a few exceptions Reloading

Small Rifle Primers vs Large Rifle Primers

Joseph von Benedikt - December 22, 2018

A close look at using small rifle primers rather than large rifle primers in reloading...

See More Reloading

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get Digital Access.

All Rifle Shooter subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now