Guns & Ammo Network


Collapse bottom bar
Subscribe
Ammo

.35 Whelen

January 4th, 2011 8

Old but capable, the .35 Whelen hangs on and may be the perfect cartridge for certain applications.


During the very early 1920s, Leslie Simpson, who reputedly had more experience at hunting African game than any other American at the time, casually mentioned to Col. Townsend Whelen that the ideal cartridge for hunting most of the hoofed game on the Dark Continent would push a .35 caliber bullet weighing at least 250 grains to a muzzle velocity of 2,500 fps or perhaps a bit faster.

At the time, Whelen was commanding officer at Frankford Arsenal, and James V. Howe was foreman of the machine shop there. Whelen relayed Simpson’s message to Howe, and Howe eventually came up with two new cartridges: the .35 Whelen–which Howe named for the colonel while the latter was on a hunting trip–for standard-size actions and the belted .350 Griffin & Howe Magnum for magnum-length Mauser actions.

The .350 Magnum was loaded by the Western Cartridge Company, but the .35 Whelen remained a wildcat until it was domesticated by Remington in 1987.

Whelen’s favorite rifle in this caliber–and one he owned until his death in 1961–was a custom job built on the 1903 Springfield action by Howe in 1922. Among other nice things it had a trapdoor steel buttplate and a Howe-Whelen aperture sight on the bolt sleeve. The sight housing also contained a safety.

The rifle was originally in .400 Whelen (see sidebar) and later rebarreled to .35 Whelen. The colonel’s favorite loads for that rifle were 61.0 grains of IMR-4350 behind the Hornady 275-grain bullet and 60.0 grains of the same powder with the Barnes 300-grain bullet (neither bullet is now in production). Respective velocities were 2,375 and 2,350 fps.

As other cartridges of the same caliber go, the .35 Remington is 400 to 500 fps slower than the .35 Whelen, and the .358 Norma Magnum is 400 fps faster.

Remington continues to load the .35 Whelen with two bullets, a 200-grain pointed Core-Lokt at a velocity rating of 2,675 fps and a 250-grain pointed Core-Lokt at 2,400 fps. Federal offers a single option with the 225-grain Trophy Bonded Bear Claw at 2,600 fps.

Nosler offers three choices in its Custom lineup: the 225-grain Partition and Ballistic Tip at 2,775 fps and a 250-grain Partition at 2,550 fps.

Remington sells unprimed cases, and the .30-06 case can be necked up to .35 caliber. I prefer to size up cases in two steps using a .35 Whelen full-length resizing die–first with an expander button sized for the .338-06 installed in the die and then another trip over a .35 caliber button. Tapered expander buttons are available from Redding, Lyman and RCBS.

A number of powders are suitable for use in the .35 Whelen, and most work quite well. If I had to choose one for all bullet weights, I would look at IMR-4895, IMR-4064 and IMR-4320.

Bullets weighing 200 to 225 grains are more comfortable to shoot due to less recoil, and relatively soft bullets such as the 225-grain Sierra and Nosler Ballistic Tip are great choices for deer. When either of those bullets exits the muzzle in the neighborhood of 2,600 fps, and is zeroed three inches high at 100 yards, it will be about two inches above line of sight at 200 yards and around eight inches low at 300.

For larger game such as elk and moose, I believe the Swift 225-grain A-Frame and the Nosler Partition of the same weight are tough to beat. Due to their higher velocity they shoot flatter and retain more weight for deep penetration than softer bullets weighing 250 grains.

I have no plans to hunt brown bear with a rifle in .35 Whelen, but if ever I change my mind either the Swift 250-grain A-Frame or the 250-grain Nosler Partition will be my choice in bullet.

Like many cartridges over .30 caliber, the .35 Whelen has never enjoyed great popularity among big game hunters. It’s a bit much for deer, and hunters who go after larger game with a medium-bore cartridge often choose flatter-shooting and more powerful cartridges such as the .338 Winchester Magnum.

table#specialTable {padding: none;background: black; font-family: Arial,Helvetica, sans-serif;text-align: left;font-size: 11px;}table#specialTable tr {color: red; background:blue;}#specialTable td {margin: 2px; padding: 2px; background: #cccccc; color:black;border-right: 1px solid black; border-bottom: 1px solid black;}#specialTable td.noright {margin: 2px; padding: 2px; background: #adadad;color: black;border-right: none;border-left: none; border-bottom: 1px solidblack;}#specialTable td.noleft {margin: 2px; padding: 2px; background: #adadad;color: black;border-right: 1px solid black;border-left: none; border-bottom:1px solid black;}#specialTable td.noborder {margin: 2px; padding: 2px; background: #669966;color: black ;border-right: none; border-bottom: 1px solid black;}#specialTable th {margin: 2px; padding: 2px; background: #ffffff; color:black;font-family: Verdana, Arial, Helvetica, sans-serif;text-align:left;font-size: 9px;}#specialTable tr.offcolor td { background: #ffffff;}#specialTable tr.footer {}#specialTable td.footer {}#specialTable h3 { margin: 0; padding:0;font-size: 15px; border-bottom: 2pxsolid #669966;}.bottom { 2px solid black;}

A FEW GOOD .35 WHELEN LOADS

Bullet Bullet Weight (gr.) Poweder Type Poweder Charge(gr.) Muzzle Velocity (fps)
Barnes XFB 180 H335 59.0 2,794
Hornady PSP 200 IMR-4320 58.0 2,617
Nosler Ballistic Tip 225 Varget 51.0 2,552
Nosler Partition 225 V-N140 56.0 2,581
Sierra SBT 225 IMR-4064 57.0 2,510
Swift A-Frame 225 RL-15 58.0 2,566
Nosler Partition 250 IMR-4320 53.0 2,429
Swift A-Frame 250 H4895 53.0 2,374
Speer PSP 250 H3335 52.0 2,430
Barnes PSP* 275 H380 57.0 2,336
Barnes PSP* 300 BL-C(2) 53.0 2,228
Remington Core-Lokt 200 factory 2,511
Federal TBBC 225 factory 2,529
Remington Core-Lokt 250 factory 2,348
* These bullets are no longer available.
Notes: Powder charges are maximum and should be reduced by 10 percent for starting loads. Remington cases and No.9 1/2 primers were used in all loads. Velocities represent an average of five or more rounds clocked at 12 feet from the muzzle of a 22-inch Apex barrel. Abbreviations: XFB, X flat base; PSP, pointed soft-point; SBT, spitzer boattail; TBBC, Trophy Bonded Bear Claw
Warning: The loads here are safe only in the guns for which they were developed. Neither the author nor Intermedia Outdoors assumes any liability for accidents or injury resulting from the use or misuse of this data. Shooting reloads may void and warranty on your firearm.

Remington is down to one rifle in this caliber (the 700 CDL) and no longer offers it in the Model 7600 pump gun. However, when Remington offered the Limited Edition Model 700 Classic in .35 Whelen in 1988, it was a success–eclipsing sales of all but the .300 Weatherby Magnum in this 25-rifle series.

Perhaps the best testimony of the effectiveness of the .35 Whelen on big game was written years ago, by a hunter who used it to take an Alaska brown bear. He wrote: “At the impact of my 275-grain bullet the bear spun partly away from me. Immediately I fed him another bullet right between the shoulders, and he turned back toward me. Then, as he lurched forward, I shot him through both shoulders. The grizzly fell dead at my feet.”

The year was 1937, and the grizzly in the story ended up second in the Boone & Crockett record book. The .35 Whelen rifle the hunter used was built by Griffin & Howe, on a 1903 Springfield action. His handload consisted of the 275-grain Western Tool & Copper Co. bullet pushed to maximum velocity by IMR-4064. That hunter was none other than Elmer Keith.

  • bobby

    i have a 35 whelen and i only had 50 yards to zero it in. i'm shooting 200g.
    can any body tell me where i it would be at a 100 yqrds

    • http://yes.no/ of course

      bullet is climbing at 50, should apogee around 2 – 3 in high at 100 and zero at 175 to 200 yds depending on grains of powder and mass of bullet

  • Squeaky

    Wow…I can only guess. But what its worth, I got my 35 Whelen with 200gr Remington factory ammo in a 2inch bulls-eye at fifty yards, then moved out to 100 yards. My impact point was about 3inches high. Now I'm only guessing here…but I believe in my case, hitting the 2inch target at 50yds was with the bullet on the way "up" in its trajectory. When I re-aligned my impact point to 1 inch high at 100 yrds – I did NOT retest at 50yds to compare. But I would expect the 50yrd impact point to have gone DOWN by perhaps a .5 inch. Without knowing your actual trajectory – you could assume your 50yd zero is fine for a 6 inch kill zone at 100yds. BUT, I would not attempt a shot beyond say 150yds MAX until you have chance to test against a 50 yrd, 100yrd, and 150yrd target.

  • DennisKsmith

    I have a Classic Remington 700 that groups .600" at 100 yds….. Hornady 180 gr. ssp bullet over 63.5 gr. H4831sc…CCI primer…Remington cases.

  • WAYNE H. WHITEHEAD

    SIGHTING IN AT 50 YARDS WITH THE 200 GRAIN BULLET WILL BE APPROXIMATELY 3" HIGH AT 100 YARDS. SIGHT YOUR RIFLE IN ON A 2" CIRCLE BULLSEYE (USING A 6 O'CLOCK HOLD) AT 50 YARDS AND PRINTING AT 6 O'CLOCK. PLACE A 4" TARGET AT 100 YARDS, USING THE 6 O'CLOCK HOLD AND THAT SHOULD GET YOU RIGHT IN THE BALLPARK. MAY NEED A LITTLE WINDAGE TWEAKING?

  • oldsouthpaw

    I am using the 35 WHELEN 0n wild hogs here in TEXAS. with most shots placed right behind tthe shoulder. The 200 grn Hornady being pushed with Reloader 15 puts them right down. I shot a Boar that we know weighed over 400 lbs. The bullet punched through the grissel plate leaving a hole i could put three fingers in and stopped just under the hide on the far side. This hog did not go 20yds. I love the 35 Whelen on hogs although it is a little much on deer. What a HOG GUN it is,

  • Robertdyer91

    I'm thinking about buying a mouser 1909 35 whelen to deer hunt with and wondered if this was a good gun to white-tail hunt with and what bullets should i use

    • http://yes.no/ of course

      .243 win

back to top